The voltage of a typical single lead-acid cell is ∼ 2 V. As the battery discharges, lead sulfate (PbSO 4 ) is deposited on each electrode, reducing the area available for the reactions. Near the fully discharged state (see Figure 3), cell voltage drops, and internal resistance increases.
Explore the lead acid battery voltage chart for 12V, 24V, and 48V systems. Understand the relationship between voltage and state of charge.
Anything above 2.15 volts per cell will charge a lead acid battery, this is the voltage of the basic chemistry.
The recommended float voltage of most flooded lead acid batteries is 2.25V to 2.27V/cell. Large stationary batteries at 25°C (77°F) typically float at 2.25V/cell. Manufacturers recommend lowering the float charge when the ambient temperature rises above 29°C (85°F).
To charge a sealed lead acid battery, a DC voltage between 2.30 volts per cell (float) and 2.45 volts per cell (fast) is applied to the terminals of the battery. Depending on the state of charge (SoC), the cell may temporarily be
The 48V lead-acid battery state of charge voltage ranges from 50.92 (100% capacity) to 45.44V (0% capacity). Lead acid battery is comprised of lead oxide (PbO2) cathode and lead (Pb) anode. The medium of exchange is sulphuric acid. Most common example of lead-acid batteries are car batteries.
Those of you using a 24 Volt system with twelve lead-acid cells in series must multiply the voltage in the text and on the charts by two. The voltage versus state of charge (SOC) profiles will match those of similarly constructed cells. Other types of lead acid cells, like car batteries, lead-calcium cells, and "RV deep cycle"
Here are lead acid battery voltage charts showing state of charge based on voltage for 6V, 12V and 24V batteries — as well as 2V lead acid cells. Lead acid battery voltage curves vary greatly based on variables like temperature, discharge rate and battery type (e.g. sealed, flooded).
The lead-acid battery voltage chart shows the different states of charge for 12-volt, 24-volt, and 48-volt batteries. For example, a fully charged 12-volt battery will have a voltage of around 12.7 volts, while a fully charged 24-volt battery will have a voltage of around 25.4 volts.
The correct setting of the charge voltage is critical and ranges from 2.30 to 2.45V per cell. Setting the voltage threshold is a compromise, and battery experts refer to this as "dancing on the head of a needle."